Brass Pinion Gears 1.5mm shaft

Brass Motor Pinion Gear for 1.5mm Shaft, Stock and Barrage style motor, Or any motor with a 1.5mm shaft, 11 Teeth count same size as stock, Also have 14T gears and 20T gears for extra speed less torque. Also can select 8T and 10T both faster ratio for Mod.5 pitch such as aftermarket spur gears from hot racing or furitek. Any gear option other than 11T will require a special designed aluminum mount for 030/050 motor to allow adjustment which can be purchased from add on menu or from store item separately. These do not have set screws, you must press them on, I recommend a vice, Make sure it is aligned and the rear of the shaft should be supported I use a 3/16 socket at the rear hump to support against the shaft before pressing on. Once installed these will not come loose and if needed to be removed the way ive found is to crush the gear in a vice and then slide it off. See youtube videos from mofo rc for gear mesh, wheel nut torque and install demos.