TorqueBeast 30 Motor
This is the new Torque Beast 3.0 Motor in 030 size, The same size as the stock scx24 motor and is a direct bolt in upgrade. This motor has Gobs of torque and super smooth low speed control. It is not a speed demon. It is slower than the stock scx24 motor. It will make your scx24 crawl much better at low speed without the jumpyness of the the stock motor and has more pulling power to get you through the tough spots and bind up situations. This motor will work with all the scx24 models and v1 or v2 escs.
The 030 TorqueBeast 3.0 motor has a proprietary wire diameter and winding count matched up perfectly to give you the most amazing brushed motor low speed crawling control. The Copper/Carbon alloy Brushes will keep the motor running smooth and offer a very long life. The motors all come with the wire harness soldiered on at a 90 degree angle to provide better clearance under the battery tray and less likelyhood of catching on anything. Do not bend the wires straight or you may break them off.
The TB30 will also run on 3s Lipo power if you are running a 3s capable esc. The Motor comes with the pinion gear on it that you choose from the options. If you Choose the mod.5 option for gearing it will work on the stock motor plate using The mofo rc mod.5 spur gear with either the 7t pinion or the 8t pinion gear option, The last picture shown is with the mod.5 spur gear installed.
DO NOT BUY MOD.5 IF YOU DONT HAVE A MOD.5 SPUR GEAR YOU WILL RUIN YOUR SPUR GEAR AND THE MOTOR